<input id="w84ge"><s id="w84ge"></s></input>
  • <blockquote id="w84ge"></blockquote>
  • <input id="w84ge"><object id="w84ge"></object></input>
  • <center id="w84ge"><dd id="w84ge"></dd></center>
  • <samp id="w84ge"><samp id="w84ge"></samp></samp>
    • 42110/8S1P LiFePO4 battery Pack 25.6V/11Ah
    • 42110/8S1P LiFePO4 battery Pack 25.6V/11Ah
    • Lighting battery pack - 42110/8S1P LiFePO4 battery Pack 25.6V/11Ah
    • Lighting battery pack - 42110/8S1P LiFePO4 battery Pack 25.6V/11Ah

    42110/8S1P LiFePO4 battery Pack 25.6V/11Ah

    Lighting battery pack

    Model: AY-L08S01-050
    Voltage: 25.6V
    Capacity: 20.4Ah
    Size (can be customized): L350*W150*75MM
    Cell Model:  

    • Description
    • Get quote
    Sender email add: RE: 42110/8S1P LiFePO4 battery Pack 25.6V/11Ah
    • Lighting battery pack

      AY-L08S01-050

      No Test item Criterion
      Nominal capacity 11Ah 42110 3.2V/11AH
      Nominal voltage 3.2V 3.2V/1 Cell
      Charging voltage 28.8V±0.05V 3.6V/1 Cell
      Charging method CC/CV (Constant-current and-Voltage with Limited current
      Standard charging time 3000mA/3.5hour Battery capacity÷charging current×1.5
      Charging current 5500mA(0.5C) 0~+40℃
      Maximum charging current 11000mA(1C) 0~+40℃
      Continuous discharge current 11A(1C) -20~+60℃
      Discharge cutoff voltage 2.0V 2.0V/1 Cell
      Short circuit protection Exterior short circuit Automatic recovery
      Intermal resistance ≤200mΩ AC lmpedance 1kHz
      Cycle life ≥500  
      Operating temperature Standard Charge 0~+40℃  
      Standard Discharge -20~+60℃  
      Outline dimension L240*W87*H87mm Length x wide x height
      Pre-wired   Red=Positive,Black=Negative
      Protection Circuit Module: PCM-L08S12-440
      Maximal continuous charging current 12A  
      Maximal continuous Discharging current 12A  
      Over-charge detection voltage 3.90±0.05V Single cell
      Over-charge release voltage 3.80V±0.05V Single cell
      Over-charge detection delay time 0.5S-1.5S Single cell
      Over-discharge detection voltage 2.00±0.10V Single cell
      Over-discharge release Voltage 2.00±0.10V Single cell
      Over-discharge detection delaytime 50-150mS Single cell
      Over-current detection 40±10A can adjust
      Over-current delay time 5-15mS  

    Copyright ? 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.

    <input id="w84ge"><s id="w84ge"></s></input>
  • <blockquote id="w84ge"></blockquote>
  • <input id="w84ge"><object id="w84ge"></object></input>
  • <center id="w84ge"><dd id="w84ge"></dd></center>
  • <samp id="w84ge"><samp id="w84ge"></samp></samp>
  • 超凡棋牌游戏