<input id="w84ge"><s id="w84ge"></s></input>
  • <blockquote id="w84ge"></blockquote>
  • <input id="w84ge"><object id="w84ge"></object></input>
  • <center id="w84ge"><dd id="w84ge"></dd></center>
  • <samp id="w84ge"><samp id="w84ge"></samp></samp>
    • 3S7P 11.1V 18.2Ah Li-ion battery pack for dive lighting
    • Lighting battery pack - 3S7P 11.1V 18.2Ah Li-ion battery pack for dive lighting

    3S7P 11.1V 18.2Ah Li-ion battery pack for dive lighting

    Lighting battery pack

    Model: AY-L15036
    Voltage: 11.1V
    Capacity: 18.2Ah
    Size (can be customized): L205*T56MM
    Cell Model:  

    • Description
    • Get quote
    Sender email add: RE: 3S7P 11.1V 18.2Ah Li-ion battery pack for dive lighting
    • Lighting battery pack

      AY-L15020

      3S7P 11.1V 18.2Ah Li-ion battery pack for dive lighting
      Technical Parameters
      Battery pack * 36V 20.4Ah Li(NiCoMn)O2 Battery is made by 60pcs of
      Li(NiCoMn)O2 18650 3400mAh cellsLi(NiCoMn)O2 18650 3400mAh cells
      * In 10S6P configuration
      * Wrap with heavy duty PVC
      Charge Information *Charge voltage: 12.6V±0.05V (4.2V/cell)
      *Charge method: CC/CV (Constant-current and-Voltage with Limited current)
      *Standard charging time: 5000mA/5.5hours, 8000mA/3.5hours
      (Battery capacity÷charging current×1.5 )
      *Charge voltage: 42V (4.2V/cell)
      *Charge current: 5A (0.5C)
      Dishcharge Information * Maximum discharging current: 10A (1C)
      * Continuous discharge current: 10A (1C)
      * Discharge cut-off voltage: 7.5V (2.5V/cell)
      Protection Information * Protected by one PCM: PCM-L04S12-144
      * PCM is installed in the battery pacl to balance charging and protect battery
      * Must wait min of 30 minutes afrer battery is fully charged to allow the PCM to perform balance function on all the cells within the pack
      * Maximal continuous charging current: 10A
      * Maximal continuous discharging current: 10A
      * Over-charge& over-discharge detection voltage: 4.25V/2.5V
      * Over-current detection: 35A±5A
      Short-circuit Protection Exterior short circuit Automatic recovery
      Intermal resistance / Cycle life ≤200mΩ / ≥500
      Operating Temperature *Standard Charge: 0~+40℃ / *Standard Discharge: -20~+60℃
      Pre-wired * Red=Positive,Black=Negative
      Weight/Dimension around 3.5kgs(including cells,pcm.pvc wires) ; L205*W90*T56MM
      Applications * Apply to e-bike, e-scooter , three-wheeler rickshaw
      * Replace 36V Nimh battery and 36V lead acid battery with much clear engergy.
      Warnings * 36V 20.4Ah Li(NiCoMn)O2 Battery should be cut-off at ≥25V (2.5V/cell) during
      discharging, and should be stop charging at ≤42V(4.2V/cell)during charging.
      * We are not responsible for an damages or losses caused by misuse (included but not
      limited to: Improper charging/discharging, any changes of this battery pack,
      miss-assembling battery packs.)
      * Always pay attention to when charging the battery pack. Battery shall put in a place
      or wrong polarity connection.
      * Please always check battery polarity before connection to device. Never make wrong polarity connection.

    Copyright ? 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.

    <input id="w84ge"><s id="w84ge"></s></input>
  • <blockquote id="w84ge"></blockquote>
  • <input id="w84ge"><object id="w84ge"></object></input>
  • <center id="w84ge"><dd id="w84ge"></dd></center>
  • <samp id="w84ge"><samp id="w84ge"></samp></samp>
  • 超凡棋牌游戏